Hex Brass Nut

Jinghong Factory specializes in producing brass hex nuts, made of brass with high thread accuracy and standard hexagonal edge dimensions. The surface of the product has a golden metallic luster. Brass nuts have good conductivity, corrosion resistance, and do not produce magnetism. The specifications range from M2 to M16, and both coarse and fine teeth can be produced. Regular sizes are readily available in stock, and non-standard customization is supported.

Send Inquiry

Product Description

The thread is standard metric coarse thread, M3 to M20. The edge size is the same as a regular nut, and the socket and open-end wrench do not need to be replaced. The surface can be polished into a mirror like shiny gold.

Hexagonal wrench is universal and can be tightened with an open-end wrench, a ring wrench, or a socket. We control the edge dimensions according to national or German standards, and the wrench is just right when clamped, without looseness or shaking.

Name	Hex Brass Nut
Material	Brass
Standards	GB,DIN, BSW, JIS, UNC, UNF, Non-standard, Customized Drawing
Thread	Metric Coarse, Metric Fine, UNC, UNF, BSW, BSF.
Sizes	M1-M30Metc
Finish	Plain/Other
Price	0.03usd/pcs-0.50usd/pcs
MOQ	Stardard item(Usually little hundred-little thousand)/determined if non-standard

Product Feature

Hexagonal edge standard, wrench does not slip: Hexagonal edge dimensions are produced according to the standard, with good flatness and no obvious rounded corners. Using a wrench to secure it has a high degree of fit, and tightening it vigorously will not round the edges and corners.

High thread accuracy, smooth tightening: The thread of the nut is fully inspected with a thread stop gauge, with a precision of 6H. Equipped with the same brass or stainless steel screws, it can be smoothly unscrewed by hand without any jamming sensation. There will be no phenomenon of being too tight to move halfway.